Specifications - Sharp IM-MT899H Service Manual

FOR A COMPLETE DESCRIPTION OF THE OPERATION OF THIS UNIT, PLEASE REFER TO
THE OPERATION MANUAL.
IM-MT899H
Power source:
Power consumption:
Output power:
Charging time:
Dimensions:
Weight:
Input socket:
Output socket:
Type:
Signal readout:
Audio channels:
Frequency response:
Rotation speed:
Error correction:
Coding:
Recording method:
Sampling frequency:
Wow and flutter:
Battery life:
When using the rechargeable
battery (fully charged) included
with the unit
When using one, commercially
available, high capacity, "AA"
size (LR6), alkaline battery (The
rechargeable battery is in the
unit, discharged.)
When using one, commercially
available, high capacity, "AA"
size (LR6), alkaline battery with
the rechargeable battery (fully
charged)
Input sensitivity:
Reference input
level
MIC H 0.25 mV
MIC L 2.5 mV
LINE 100 mV
The continuous recording time is for analogue inputs when the volume level is set to "VOL 0".
The continuous play time shows the value when the volume level is set to "VOL 15".
The above values are the standard values when the unit is charged and used at an ambient temperature of 25
The operating time when using an alkaline battery may be different, depending on the type and manufacturer of the battery,
and on the operating temperature.
The L(LIGHT) is set at "O(OFF)".
Specifications for this model are subject to change without prior
notice

SPECIFICATIONS

DC 5 V: AC adaptor (AC 230 V, 50/60 Hz)
DC 1.5 V: Commercially available, "AA" size (LR6), alkaline battery x 1
DC 1.2 V: Rechargeable Nickel-Metal Hydride battery AD-N55BT x 1
DC 1.5 V: Optional car adaptor, AD-CA55X (for cars with a 12 - 24 V DC negative
earth electrical system)
7 W (AC adaptor)
RMS: 10 mW (5 mW + 5 mW)
(0.2 % T.H.D.)
Approx. 3.0 hours (90 %)
Approx. 5.0 hours (fully charged)
Width: 78.9 mm ( 3-1/8")
Excluding the projection around the USB connection terminal
130 g (0.29 lbs.) with rechargeable battery
Line/optical digital, microphone (powered by the main unit)
Available USB port
Earphones (impedance: 32 ohms)/remote control unit
Portable MiniDisc recorder
Non-contact, 3-beam semiconductor laser pickup
Stereo 2 channels/monaural 1 channel
20 - 20,000 Hz ( 3 dB)
Approx. 400 - 1,350 rpm
ACIRC (Advanced Cross Interleave Reed-Solomon Code)
ATRAC/ATRAC3 (Adaptive TRansform Acoustic Coding), 24-bit computed type
Magnetic modulation overwrite method
44.1 kHz (32 kHz and 48 kHz signals are converted to 44.1 kHz, and then recorded.)
Unmeasurable (less than 0.001 % W. peak)
Stereo
Continuous Continuous
recording: play: Approx.
Approx. 6 9.5 hours
hours
Continuous Continuous
recording: play: Approx.
Approx. 6 14 hours
hours
Continuous Continuous
recording: play: Approx.
Approx. 14.5 24 hours
hours
Input impedance
10 k ohms
10 k ohms
20 k ohms
Height: 15.7 mm (5/8") Depth: 71.9 mm (2-27/32")
2 times long
Continuous Continuous
recording: play: Approx.
Approx. 8.5 11 hours
hours
Continuous Continuous
recording: play: Approx.
Approx. 9.5 17.5 hours
hours
Continuous Continuous
recording: play: Approx.
Approx. 20.5 29.5 hours
hours
Output level:
Specified
output
Earphones -
LINE 250 mV (-12
dB)
– 3 –
IM-MT899H/IM-MT899W
4 times long
Continuous Continuous
recording: play: Approx.
Approx. 10 12.5 hours
hours
Continuous Continuous
recording: play: Approx.
Approx. 12.5 19.5 hours
hours
Continuous Continuous
recording: play: Approx.
Approx. 26 33 hours
hours
Maximum Load imped-
output level ance
5 mW + 5 32 ohms
mW
- 10 k ohms
° °
C (77 F).