MADOTI BAITA Assembly Manual page 9

Waldorf playstand

Available languages

Thank you for purchasing BAITA, we advise you to read this guide very carefully before assembly and to follow

every procedure in order to use the product safely.

MADOTI di Valentina Bianco cannot be held responsible in any way for any loss or injury, regardless of how it

occurs, if it is the result of neglecting the instructions, using the product incorrectly or misinterpreting the informa-

tion contained in this document or on our site.

You should keep this guide and in case you need assistance with the product please contact Valentina Bianco at

the following numbers:

Valentina Bianco

Via Provinciale 4/b , 12030, Gambasca (CN)

VAT: IT03827150040

Tel: +39 3400825185

Mail: hello@madoti.it

Warnings:

This manual describes the general safety rules to be observed during any operation performed with the product.

The procedures for using and cleaning the game, described in the following chapters, must be carried out in com-

pliance with both the procedures indicated and the general safety regulations. Different countries may have diffe-

rent safety regulations. It should therefore be noted that in all cases in which the regulations of the manuals conﬂict

with or are reductive to the regulations of the country in which the toy is sold and used, the regulations of the coun-

try shall take precedence over those of the manuals.

WARNING:

The product must be used under the supervision of an adult who can readily intervene if

necessary.

-Check the integrity of the product upon receipt. If you ﬁnd any damage, missing, deformation or traces

of impacts due to transport, notify the manufacturer before proceeding.

-Do not leave the product near heat sources.

-Do not expose it to open ﬂames.

-Do not expose the product to continuous sunlight.

-Store the playstand in a clean, dry place, away from heat sources and atmospheric agents.

-Check and clean the product in the manner described in this manual.

-Make sure that the packaging and the product do not come into contact with sharp edges and abrasive

surfaces.