MADOTI BAITA Assembly Manual page 15

Step 9
If you chose the double structure, couple the two structures and insert the joint rod at the top end.
WARNING! Check the soundness of the structure before each use and contact the manufacturer imme-
diately if any anomalies are found.
The supervising adult must also check that
-The components of the product are not damaged and are dangerous;
-Check that the product is clean and if necessary clean it (see Cleaning and storage).
THE MANUFACTURER CANNOT UNDER ANY CIRCUMSTANCES BE HELD LIABLE FOR ACCIDENTS OR
DAMAGE RESULTING FROM THE INAPPROPRIATE USE OF THE PRODUCTsl, AS WELL AS FROM THE
FAILURE TO COMPLY EVEN PARTIALLY WITH THE SAFETY REGULATIONS AND INTERVENTION PRO-
CEDURES DESCRIBED IN THE DOCUMENT.
EN