STS XPD 724 Manuallines
  1. Manuals
  2. Brands
  3. STS Manuals
  4. Printer
  5. XPD 724
  6. Manuallines

STS XPD 724 Manuallines

Hide thumbs Also See for XPD 724:
Table of Contents

Advertisement

Quick Links

Download this manual
STS/Mutoh XPD 724 Printer Guidelines

• Best Environmental Conditions

No direct sunlight.
Dust free with minimal static.
Temperatures between 20 and 24 degrees Celsius/68-75F 24hrs a day 7 days a week Humidity 35% -
45%.
Note: This printer is designed to stay on, the built-in internal circulation cycles throughout the night.
XPD-724 printer only works with XPD Ink.

• Daily Maintenance/Before Daily Printing

1. Remove and rotate the 2 white ink cartridges to a flat position and shake them from
side to side with the cartridge slot guide in both up and down positions (40x) each day
before wakeup from sleep mode.
2. Also shake the cartridge upside down to make sure the cartridge contents is mixed in
appropriately
Keep this printer on & attached to a surge protector

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the XPD 724 and is the answer not in the manual?

Questions and answers

Related Manuals for STS XPD 724

Summary of Contents for STS XPD 724

  • Page 1 STS/Mutoh XPD 724 Printer Guidelines • Best Environmental Conditions No direct sunlight. Dust free with minimal static. Temperatures between 20 and 24 degrees Celsius/68-75F 24hrs a day 7 days a week Humidity 35% - 45%. Note: This printer is designed to stay on, the built-in internal circulation cycles throughout the night.
  • Page 2 Do not lift or touch the media when the printer is in operation! WARNING STS Inks will not warranty any head damage due to operator error. Please always follow best practice guidelines. • What to do if the print head strikes the PET film...
  • Page 3 STS/Mutoh XPD 724 Printer Guidelines The PET Film used for DTF printing is covered with a layer of a specialized emulsion that sets the inks to a gel-like state when the ink lands on the film. Therefore, if the print head touches the PET film any ink...
  • Page 4 STS/Mutoh XPD 724 Printer Guidelines www.stsinks.com • Cleaning of Cleaning Wiper Cleaning period: • Weekly. • When print blurring and dot missing remain after head cleaning is done. Preparation: • Cleaning Stick. Steps: 1. Display the Printer Preferences screen of printer driver.
  • Page 5 STS/Mutoh XPD 724 Printer Guidelines 5. Short press the operation key on the operation panel. * The carriage moves to the maintenance position inside the front cover. 6. Open the front cover. IMPORTANT - When cleaning the cleaning wiper, please note the followings.
  • Page 6 STS/Mutoh XPD 724 Printer Guidelines www.stsinks.com • Inside Cleaning Cleaning period: • Monthly. Steps: 1. Check the power is OFF. 2. Open the front cover. IMPORTANT Inmediately after turning OFF the power, the temperature of the heater on this product is very high.
  • Page 7 4. To maintain the ink delivery system, every three to four months flush the printer using Long Store option in your MSM remote panel. 5. When not printing for long periods (more than 14 days); Flush all ink lines with STS Cleaning Solution.

Table of Contents