Quick Get Start - Ebyte ECAN-W01 User Manual

Chengdu Ebyte Electronic Technology Co., Ltd

Network interface upgrading function;

Working temperature range: - 40 ℃~+85 ℃.

2. Quick Get Start

You need quasi ECAN-W01 * 1, power adapter * 1, network cable * 1, 2.4GWiFi antenna * 1, CAN
analyzer * 1;
1、 The factory default of the device is AP mode, the SSID is ECAN-W01-XX, and the password is
12345678. After the device is powered on, search the device WiFi through the PC, as shown in
the following figure:
Click Connect to connect to the device's WiFi
2、 Open the network debugging assistant of the computer, set it as TCP Client, set the remote
host IP to 192.168.4.101, and set the remote host port number to 8881.
3、 Connect CAN1 of ECAN-W01 to CAN resolver. When ECAN-W01 is connected to CAN bus, just connect
CAN_ H connected to CAN_ H，CAN_ L connected to CAN_ L is enough. (Note that the default CAN
baud rate is 100K)
4、 The network assistant can be used to realize the communication between devices and peripherals.
Copyright©2012–2022, Chengdu Ebyte Electronic Technology Co.,Ltd
ECAN-W01 User Manual