Sunwind Electronics Company Ltd.
1. Introduction,Features and Applications
Introduction
The M542H is an economical microstepping driver based on patented technology of Sunwind. It is
suitable for driving 2-phase and 4-phase hybrid stepping motors. By using the advanced bipolar
constant-current chopping technique, it can output more speed and torque from the same
motor,compared with traditional drivers, such as L/R drivers. Its 3-state current control technology allows
coil currents to be well controlled and with relatively small current ripple, therefore less motor heating is
achieved.
Features
L ow cost and good high-speed torque
Supply voltage up to +100VDC
Output current up to 4.5A
Pulse frequency up to 300 KHz
3-state current control technology
Suitable for 2-phase and 4-phase motors
Over-voltage and short-circuit protection
Applications
Suitable for a wide range of stepping motors from NEMA size 17 to 34. It can be used in various kinds of
http://www.stepmotordriver.com
Stepper Motor Driver:M542H
Automatic idle-current reduction
16 selectable resolutions
DIP switch current setting with 8
different v alues
CW/CCW mode available (optional)
Optically isolated input signals
Slim size (118x75.5x33mm)
5 / 21
sales@stepmotordriver.com