InVid Tech Protect Series User Manual page 104

Before You Start
Please make sure you already have an IPC whose connection status is Connected.
Steps:
1. Go to Seven Grid Menu →Camera→ Image→ OSD.
2. Select a camera.
3. Set parameters as your desire.
4. The name and time can be chose to display or not, and can also be customized.
5. Click Apply.
The settings are divided into two parts: channel settings and general settings. The channel setting
is to configure the IPC, and the general setting is to set the NVR local display.
For the Channel Setting:
Channel
Select the channel to configure.
Channel Name
The name of the channel to be set.
Show Name, Show Time
Enable the information of channel name and time on the screen.
Date Format, Time Format
Set the format of the date and time.
For the general set:
Time Title, Channel Title
Enable/disable the display of the time tile and channel title on the monitor screen.
Record Status, Alarm Status
Enable/disable the display of the record status and alarm status on the screen.
Figure 10-3-3-2 OSD
92