Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Denver Manuals
  4. Monitor
  5. SC-17
  6. Quick start manual

Denver SC-17 Quick Start Manual

Hide thumbs Also See for SC-17:

Advertisement

Quick Links

Download this manual
DENVER SC-17
Installation
This chapter provides instructions to install the video baby monitor.
At the first use, please recharge the battery inside the parent unit by using
the power adapter.
The baby unit has a lens cover. Please remove this lid before you start to use
ALERT
the video baby monitor.
Before placing the camera in a definitive way (baby unit) it is advisable to check the
proper functioning of equipment and proper radio communication between parent unit
and baby unit.
1.
Connect the 5VDC – 1.000 mA power adapter
to parent unit. The power socket (DC5V
) is in the left side on parent unit.
The
battery, so when it is charged enough,
you can use the device without the power
NOTE
adapter. For more details please refer to
the parent unit chapter.
3.
Press the power button
LED available in the left side will light ON.
The display will show as picture below:
Parent Unit – LCD panel
4.
Connect the 5VDC – 1.000 mA power adapter
to Baby Unit (wireless camera). The power
socket (DC5V
The wireless camera can use 3 x AAA
batteries
details please refer to Baby Unit chapter
NOTE
ENG - 1
parent
unit
has
, the green power
) is in the back side.
(not
included).
a
rechargeable
For
more
Parent Unit – Power adapter
Parent Unit – Power ON
Baby Unit – Power adapter

Advertisement

loading
Need help?

Need help?

Do you have a question about the SC-17 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Denver SC-17

Summary of Contents for Denver SC-17

  • Page 1 DENVER SC-17 Installation This chapter provides instructions to install the video baby monitor. At the first use, please recharge the battery inside the parent unit by using the power adapter. The baby unit has a lens cover. Please remove this lid before you start to use ALERT the video baby monitor.
  • Page 2 Press and hold the POWER ON/OFF button for 5-6 seconds until the LED will flashing in red colour. This means that the pairing phase is started. Baby Unit – Power ON With a thin object, such as a paper clip, press the RESET button on the back side of the parent unit, the display should show the images and you can hear the sound picked...
  • Page 3 LCD Panel Parent Unit – Talk and Listen function This appliance has a dual connection between parent unit and baby unit (2 ways). This means that you can speak with your baby by talking in the microphone inside the parent unit and your voice will be heard by the baby through the speaker inside the camera, so you can calm him without moving.
  • Page 4 Parent Unit – Radio signal strength The LCD panel shows the radio signal strength icon. Good signal. This is the optimal condition to use the appliance. Low signal. There is communication between parent unit and baby unit, but you risk to loose the signal. It is recommended to change the position of baby unit or decrease the distance between parent unit and wireless camera.
  • Page 5 If you enable the ZOOM IN option and turn OFF the parent unit, when you will power ON the parent unit again the original view will be restored. NOTE Main Menu – Baby Unit Volume This option allows you to set the volume level of the baby unit (camera). To set the volume level of the baby unit (camera) follow these steps: Power ON the parent unit.
  • Page 6 The VERTICAL and HORIZONTAL parameters stay stored in the parent unit then when you turn OFF the appliance and power ON it again, the parent unit maintains the same settings. NOTE Effect Set – CONTRAST To set the LCD panel contrast level follow these steps: Power ON the parent unit.
  • Page 7 Press  or  buttons to select SETUP option then press OK button. Press  or  buttons to select VOX SENSE parameters then press  button to select the desired sensitivity level (HI or LOW). Press OK button to confirm the selection then press  button to exit from main menu.
  • Page 8 Connect the cable to AV OUT connector available in the right side of parent unit. Connect the 3 RCA connectors (yellow, red and white) to audio/video INPUT in the TV or VCR: The yellow connector is the VIDEO signal. The red and white connectors are the stereo audio signal. Power ON the parent unit.

  • Page 9: Troubleshooting

    3 x AAA standard batteries not included in the packaging. To power the camera with batteries please follow these steps: Disconnect the power adapter from Baby Unit and from the power socket. Open the battery door available in the Baby Unit bottom side (see the picture).
  • Page 10 Check if the power adapter is connected to Parent Unit correctly. Check if the power adapter is fitted in a compatible power socket correctly. If the power LED is light ON check if the VOX function is enabled (see VOX function chapter) or TV OUT function is enabled (see TV OUT chapter).
  • Page 11 ENG - 11...
  • Page 12 ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly.