Related Manuals for Denver MLE-2401
Summary of Contents for Denver MLE-2401
- Page 1 MLE-2401 PC Monitor Read this booklet thoroughly before using and save it for future reference...
-
Page 2: Product Overview
1. Product Overview 1.1 Monitor Buttons M Menu Button: Press to display the OSD menu or enter sub-menus. ▼ Down Button: Press to move down in the menus. ▲ Up Button: Press to move up in the menus. E Exit Button: Press to exit. Power Button: Press to turn the monitor on/off. -
Page 3: Stand Installation
2. Stand Installation Keep the foam underneath the monitor before attaching the stand. Open the package, take out the product with foam attached, and gently place them on a desktop or table. Turn the bracket to a certain angle and align it with the circular slot of the base, stick it tightly, and then rotate clockwise to clamp the bracket into the base to complete the installation of the base. -
Page 4: Connectivity Options
The assembled monitor is shown as below picture. Note 1: Please do not put your hand in the gap between the stand and the case to prevent pinching! Note 2: After the base is installed, please avoid holding the base and invert the machine to prevent falling! To avoid damage, do not touch the screen when moving the monitor. -
Page 5: Connecting Your Earphones
3.2 Connecting Your Earphones Plug in your earphones to receive audio signals from your monitor. If your earphones are connected to the monitor and audio devices are connected to your computer at the same time, the audio devices will not produce sound. Earphones and other audio devices are not supplied. -
Page 6: Hdmi Connectivity
3.4 HDMI Connectivity In order for the monitor to receive HDMI signals from the computer, use the HDMI cable to connect the monitor to the computer. Eng- 6... -
Page 7: Basic Operation
4. Basic Operation Insert one end of the HDMI cable into your PC’s HDMI port. A VGA cable may also be used (not supplied). Connect the other end of the cable to the corresponding connector on your monitor. Connect the power cable to your monitor then connect the other end to your power source. - Page 8 or vertical signal has been detected or voltage is low. Please ensure your computer is on and all video cables are fully inserted and/or connected. 10: ECO Modes and Gameplus Switching Press any one of the buttons (M, ▲, ▼, E, ) to activate the navigation window.
- Page 9 Please notice - All products are subject to change without any notice. We take reservations for errors and omissions in the manual. ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly.
Need help?
Do you have a question about the MLE-2401 and is the answer not in the manual?
Questions and answers