Lenovo Tab M10 Gen3
Level 2 – Service and Repair Manual
Middle Frame Removal
1.
Use the flat end of the Black stick to open Side
Key FPC ZIF connector and remove the LCM
FPC by Tweezer
2.
Use the Torque Driver and JCIS #0 Bit to
remove the 4 Green and 7 Sliver Screws from
the Middle Frame
3.
Starting from the Power Key use the Shim to
disengage the snaps on the Rear Cover. Work
your way around the edges of the tablet in a
counterclockwise direction as shown.
4.
Use finger remove the Middle frame
NOTE
The Middle Frame can be recovered and
reused after removal.
Page 20 / 72
Lenovo Confidential Restricted:
Do not share without consent from Lenovo