Advertisement
Replacing the lamp unit (continued)
4) Insert the new lamp unit taking care of the inserting direction.
5) Use a Phillips screwdriver to securely tighten the fixing screws for the
lamp units (x 3 each).
6)
Attach the lamp unit cover so that the
#
Slide the lamp unit cover in the direction of the arrow to fit it in place,
$
and then tighten the lamp unit cover screw.
•
Firmly install the lamp unit cover so that the connector on the lamp unit cover side is securely inserted into
the fan power connector.
•
If the projector is mounted on the ceiling, do not work with your face close to the lamp unit.
•
Attach the lamp unit and lamp unit cover securely.
•
Remove the lamp unit once and reinsert it when the lamp unit does not insert smoothly. The connector may
be damaged when inserted forcefully.
•
When a lamp unit is replaced with a new unit, the cumulated time of the lamp unit is reset automatically by
the projector.
E-5
①
Lamp unit cover
Lamp unit cover screw
mark aligns with
Fan power connector
②
.
Advertisement
