Advertisement
ATTACH BRACES
TO FRAME
STEP 6: Attach cross braces to
bottom and top shelves as shown
using 3 bolts "A". Secure each bolt
with lock washers "C" and nuts "D".
STEP 7: Place stand in upright
position and check to make sure
stand is level and has proper contact
with floor. Once stable, complete
assembly by finish tightening down
all nuts securely.
CARE & MAINTENANCE
• Clean furniture with a soft cotton cloth moistened with water.
• DO NOT use abrasives.
• DO NOT leave water on any of the stand's surfaces. Always wipe spilled water
from the stand. Water, for prolonged periods, could damage the stand's surface.
LIMITED WARRANTY
This aquarium stand is under warranty by Marco Group, Inc. against defects in material and workmanship for 90 days from
the date of purchase. If any component of the stand is found to be defective, you may contact us for replacement provided
that it has not been modified, damaged or misused. (Proof of date of purchase must be provided).
THIS WARRANTY IS VOID if the aquarium stand is modified, if it is not placed on a flat, level surface, if it is used with a tank
other than it is designed, if it is moved with the tank in place or if it is used for other than it's intended purpose.
This warranty is limited to replacement of the stand only. Warranty does not cover loss of fish, personal injury, property loss
or damage arising out of use of the aquarium stand. Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific rights
and you may have other rights that vary from state to state.
©2019 Marco Group Inc.
A
A
A
Revised 07/2019
Advertisement
