Advertisement
Please read all the following information before assembling and using your aquarium stand.
THIS PRODUCT IS NOT A TOY – NEVER allow small children to touch, climb on or play with the aquarium or the
aquarium stand. Serious injury or death could result.
WHERE TO PLACE YOUR AQUARIUM
Use only an aquarium stand designed to support the weight and size of your aquarium. The filled weight of an aquarium is
approximately 10 to 12 pounds per gallon. This stand is designed only for use on level surfaces. Failure to place your stand
on a level surface could cause the aquarium to leak, crack or even tip or fall. Never tip the stand from the upright position.
MOVING YOUR AQUARIUM STAND
Always position the stand in the desired location before putting the aquarium tank in place. Never attempt to move the
stand with the aquarium in place. Never remove an aquarium tank from the stand unless the aquarium tank is completely
empty. Never carry the stand by the top.
Please review the Parts List to ensure you have all the parts shown here. If you find missing or broken parts,
or are in need of assembly guidance, call toll free, 1-888-627-2601 and we'll be happy to help.
PLEASE DO NOT RETURN THIS MERCHANDISE TO THE STORE.
A
¼-20 x ¾" Bolt (
B
¼-20 x 1 ½" Bolt (
C
¼-20 Lock Washer (
D
¼-20 Hex Nut (
I
Wrench (
11)
x
55 gallon
29 gallon
F
Bottom Shelf (x1)
Note: Bottom Shelf will vary
depending on size of stand.
IMPORTANT SAFETY INFORMATION
BEFORE BEGINNING ASSEMBLY:
PARTS LIST
3)
x
8)
x
11)
x
11)
x
Scroll Leg (x2)
20 gallon
10 gallon
G
2
10 gallon
20 gallon
29 gallon
55 gallon
E
Top Shelf (x1)
Note: Top Shelf will vary
depending on size of stand.
H
Brace (x2)
Advertisement
