Inserting The Battery / Function Overview Jmws-1 / Jmwst-5 - Julius Mayer JMWS-1 Original Instructions Manual

Inserting the battery / changing the battery
The battery is (depending on the transmitter model) supplied loose or already installed and secured against discharge with a
protective foil. discharge with a protective film. Open the battery compartment by turning the cover (e.g. with a coin), remove
the protective foil and insert the battery into the battery compartment. Remove the protective film and insert the battery into
the battery compartment with the + (plus) side facing upwards.
Then close the battery compartment again.
Function overview JMWS-1
Function overview JMWST-5
1 2 3 4 5
Up
Stop
LED function display
Down
P2 button
Time set / channel selection key K1
Mode button
Time set / channel selection key K2
Up
Stop
Down
P2 button
FUNCTION OVERVIEW
Depending on the fre-
quency of switching ope-
rations, we recommend
replacing the battery at
least every 2 years.
21