Table of Contents
Advertisement
PREPARATION
Dismantle the multifunctional filter
(1) Remove the front panel
Step 1:
To grasp the front panel,
open the front panel
outward.
Step 3:
Remove the front panel.
(2) Take out the multifunction filter from
the unit
(3) Take out the multifunction filter from the
plastic bag.
Since the multifunction filter is a consumable,
it is not covered in the warranty period of the
Air Purifier unit. Please make sure the
NOTE
multifunctional filter is in good conditions
before removing the protective bag.
Before operating this appliance ensure selecting a flat and level location for the air purifier.
Ensure a minimum clearance of 300mm from walls or other items.
IMPORTANT
Ensure the air inlet and outlets are not blocked.
Plug the appliance into a power outlet and turn the power outlet on. Once power is connected a single beep will
be heard.
Airo
Step 2:
Pull front panel upward.
Install the multifunctional filter
(1) Install the multifunctional filter (the side
with the drawstring will face outward).
(1) Attach the front panel to the device until
the panel fits into the bottom frame.
Step 2:
Clasp the front panel inward
buckle until the bottom of the front
panel
Finally, press the position
5
fits into the Air Purifier correctly
4
5
(as shown ih the enlarged figure).
Please do not operate the Air Purifier unit
when all multifunctional filters have not been
installed.
NOTE
6
Step 1:
Hang the front panel into
position. 1
2
3
and
are in position.
4
and
to make sure the front panel
Air Purifier OIM
Advertisement
Table of Contents
