Products Warranty – Australia
For warranty details see our website:
https://www.faucetstrommen.com.au/warranty/
Installation Guide
Progressive Wall Mixers
Suits Models:
30908, 30948, 33730, 33880, 33887, 35346, 35360
Important requirements:
Must be fitted in
Mains
accordance with
500kpa
AS/NZS 3500
regulator
by qualified
must be
plumber
fitted
Cleaning
Clean only with a soft microfiber or similar cloth and warm clean water. Ensure that
the cloth is clean and free of any grit or chemical. Dry tap off with a soft clean cloth.
Ensure that your tap is not subject to any chemicals, building grit or any type of
abrasive of polish. For care of special finishes please visit our website.
Maintenance
Aerators may need to be flushed from time to time if flow diminishes or stream
pattern deteriorates. For Pegasi & Cascade mixers, use the aerator key provided
to unscrew the aerator, you will notice a "castle" pattern around the edge of the
aerator, the key engages with this enabling you to unscrew the insert easily. For Zeos
models, use the aerator key to unscrew the aerator housing, you will then be able to
pop the insert out the top of the housing. Rinse off the upper face of the insert with
running water and gently brush clean with an old toothbrush to remove any debris
before refitting the aerator.
Faucet Australia Pty Ltd
ABN 83683523321
www.faucetstrommen.com.au
P: +61 3 5450 4236
IG 017
Release Date: 15.02.23
Maximum hot
Water lines
water temp.
must be
municiple water
flushed prior
supply. No bore,
65°C
to connection
dam or hard water
without filtration
31 Tate Drive, Kerang VIC 3579
sales@faucetstrommen.com.au
Only clean
& treatment