Advertisement
Quick Links
Advertisement
Related Manuals for Garbin G SUPREME
Summary of Contents for Garbin G SUPREME
- Page 1 OVENS ELECTRICAL CONVENTION G SUPREME INSTRUCTIONS FOR USE...
-
Page 2: Control Panel
1. CONTROL PANEL manual cooking mode Recipes store Mode multi-level Washing types cooking Settings Figure 1 Lighting cooking chamber... -
Page 3: Istructions For Use
- Encoder power on / off; - menu navigation, change and confirm parameters. Figure 2 Core probe jack USB port Figure 3 1. ISTRUCTIONS FOR USE • Power on / off the oven: When voltage connection, the display shows for a few seconds the manufacturer's logo. - Page 4 The shutdown takes place through the "Off" icon (Figure 1). The ignition takes place via the encoder pressure adjustment (Figure 2). Once you press will appear on the display, the message "OUT OF STANDBY", then select "OK". The oven is ready for use. ...
- Page 5 Available recipes previous menu Confirm recipe Figure 5 Lighting cooking Delete recipe chamber Select the desired plate and confirm with the "CONFIRMATION RECIPE" icon (Figure 5). the cooking parameters are then displayed. Start the cooking process with the "Start" icon. ...
- Page 6 Adding work phase Setting time temperature setting Engine speed Core Probe Setting% Drying ON/OFF humidification Preheating ON / OFF Start cooking cycle Previous menù Figure 6 Saving recipe Lighting cooking chamber • Temperature setting: Can be set from 0 ° C to 280 ° C. Default value: 100 °...
- Page 7 Cooking chamber temperature Set temperature Delta “t” ON/OFF Values variation Keypad Previous menù Confirm value Figure 7 Lighting cooking chamber The Delta "t" function, allows you to set a difference between the chamber temperature and the cooking core probe of 30 ° C. •...
- Page 8 Time set Time to the end of cycle Time variation Keypad Previous menù Confirm value Figure 8 Lighting cooking chamber • Core probe: By selecting the "CORE PROBE" icon, you can set a temperature from 0 ° C to 99 ° C. When reaching the set point of the probe, the oven stops and beeps.
- Page 9 Adding work phase: set all the parameters for our recipe, you can put other phases of work by simply selecting the "ADDING WORK PHASE" icon (Figure 6). You can enter up to 10 steps for each recipe. Storing recipe: by simply select the "SAVING RECIPE"...
- Page 10 to start a washing program, simply select the desired one from the "WASH" menu (Figure 9) and confirm with the "OK" icon. Delayed washing: It is possible to program a washing by selecting the "delayed washing" icon (FIGURE 9), and setting it is required the type of wash (short, medium or long) and the time which is desired to start the wash cycle.