DeLUX MAVERICK SOFT WASH SYSTEM Quick Start Manual

Advertisement

DELUX® MAVERICK
SOFT WASH SYSTEM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the MAVERICK SOFT WASH SYSTEM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for DeLUX MAVERICK SOFT WASH SYSTEM

  • Page 1 DELUX® MAVERICK SOFT WASH SYSTEM...
  • Page 2 Delux® Cleaning Supply Inc. reserves the right to alter any design or specifications at any time without notice. If you have questions about your Delux® Maverick Soft Wash System that are not covered in this manual, please call us toll free at 1-888-42-DELUX...
  • Page 3 Introduction ............................. 1 What’s In The Box ..........................4 What You Need to Get Started......................5 Getting Started ..........................5 Tips and Tricks ..........................5 CleanUp ............................6...
  • Page 4 Pump Wand The Maverick Soft Wash System is a professional grade soft wash machine for low pressure roof cleaning and house washing. The high strength aluminum tube frame protects a Delux D7150 12v diaphragm pump, a Floject Accumulator, and a water tight battery box.
  • Page 5 WHAT’S IN THE BOX DELUX® 12 VOLT DIAPHRAGM PUMP 7 GPM, 100 PSI, Delux® diaphragm pump with a maximum temperature of 160 F. FLOJET ACCUMULATOR TANK The FLOJET Accumulator Tank when used with a diaphragm pump gives you the best of both worlds! High flow when you need it and the ability to restrict the flow for sensitive situations.
  • Page 6 WHAT YOU NEED TO GET STARTED A 12 VOLT BATTERY We recommend a Group 24 DeepCycle Marine 12 volt battery with 550 cold cranking amps or higher A CHEMICAL MIX TANK OR BUCKET Most contractors use a 100 gallon mix tank. GETTING STARTED 1.
  • Page 7 Use a deep cycle battery charger when charging the battery while disconnected from the system. As the battery loses power there is a potential for the 30 amp fuse located in the battery box to break. It may also cause the 40/60 SPST Relay located on the head of the pump to fail.If the system does not power on, check the fuse and the relay.

Table of Contents