Brother DCP-C421W Quick Setup Manual

DCP-C421W
1
Unpack the machine and check the components
2
Fill the ink tanks with inbox ink
BTD61BK
BT5109CMY
IMPORTANT
Check the ink bottle model name on the
label. Using the incorrect ink may cause
damage to the machine.
Remove the nozzle cap and insert the bottle nozzle firmly into the ink tank so
that the ink does not spill.
The bottle is self-standing and the ink fills automatically until the bottle is empty.
To fill the ink tank faster, squeeze the bottle on both sides.
3
Load plain A4 paper in the paper tray
Quick Setup Guide
Read the Product Safety Guide first, then read this guide for the correct installation procedure.
Keep this guide next to your machine for quick reference.
You must follow steps
1
Inbox Ink Bottles*4
Open the ink tank cover a, remove the cap
b, and place it on the back of the cover c.
to to complete the setup.
6
Remove the protective tape and the film covering the machine.
NOTE
• Save all packing materials and the box in case you must ship your
machine.
• We recommend using a USB 2.0 cable (Type A/B) that is no more than
2 meters long.
Operation Videos
www.95105369.com
2
1
3
When finished, remove the bottle,
pointing the nozzle upward so the ink
does not spill.
Fan the paper well.
Installation
& Using
Videos
Remove the film and tighten the cap firmly.
Replace the ink tank cap. Repeat
step 2 for the other ink tanks, and
then close the ink tank cover.
CHN-ENG
Version A