Access the Network Adapter with the help of a browser via the path: http://192.168.2.1.
Enter the values "name = root" and "password = mclh" and press Login.
4.1 Factory reset
Please note that in case of serious problems or incorrect settings during the setup of the network module,
there is always the possibility of a factory reset and starting the process again.
Perform the factory reset by selecting Backup / Flash Firmware in the System menu item. Choose Perform Reset to reset
the module to the factory settings (Pic.4).
Pic.3: Network Adapter login
NOTICE
Pic.4: Factory reset
5/21