AcuTemp CSafe RKN Series Easy Setup Instructions

To initiate a shipment, follow the easy instructions below.

Step 1. Turning On the Unit

Turn on the container via the power switch
located on the control panel and wait for a
few seconds as the system boots up. Check
for battery status and container status. The
unit should be charged to >90% and in idle
mode.

Step 2. Shipment Set-Up

To initiate a shipment place the unit into
shipment mode as follows: From the MAIN
menu screen, scroll down and select option 8
– "SUPERVISOR MENU" and then press the
[enter] key.
Step 3. Supervisor's Password
When prompted, enter the supervisor's
password "54321" and then press the [enter]
key. Press the [enter] key again to continue.
www.CSafeGlobal.com
2900 Dryden Road, Dayton, OH 45439. USA
US Toll-Free: +1.888.323.9576 • International: +1.937.506.4058
CSafe RKN Easy Setup Instructions