Advertisement
Quick Links
USER INFORMATION
For
®
AcuTemp
PX1L Carrying Case and
®
AcuTemp
PXC Coolant Packs
®
(Formerly VaxiPac
and VaxiSafe™)
AcuTemp Thermal Systems
2900 Dryden Road
Dayton, Ohio 45439 U.S.A.
Tel: 937.312.0114
Fax: 937.312.1277
Email: support@acutemp.com
www.acutemp.com
Advertisement
Related Manuals for AcuTemp PX1L
Summary of Contents for AcuTemp PX1L
- Page 1 USER INFORMATION ® AcuTemp PX1L Carrying Case and ® AcuTemp PXC Coolant Packs ® (Formerly VaxiPac and VaxiSafe™) AcuTemp Thermal Systems 2900 Dryden Road Dayton, Ohio 45439 U.S.A. Tel: 937.312.0114 Fax: 937.312.1277 Email: support@acutemp.com www.acutemp.com...
- Page 2 AcuTemp’s option, of components only. It does not cover any costs related to or damage resulting from the use of the PX1L or PXC packs. The repair or replacement must take place at AcuTemp Thermal Systems or a designated service center.
- Page 3 For purposes of using the PX1L carrying case and PXC coolant packs, “correctly chilled” means to cool a PXC pack to the temperature required to change the contents from a liquid phase to a solid phase. The change (a phase change) may occur at the freezing temperature of water, or it may occur at a different temperature either higher (as in the case of the PXC (+7°C), or lower...
- Page 4 AcuTemp PXC (-10°C) packs are used with frozen vaccines or other frozen payloads. Used according to the instructions, PXC (-10°C) coolant packs will maintain vaccines/products at or below -10°C in the PX1L carrying case for more than 22 hours at 24°C (75°F).
- Page 5 PX1L carry case. When placing PXC coolant packs in the PX1L carrying case, be sure to keep the pull-tab “UP” so that the pack can be removed easily. Place one frozen PXC (-15°C) on the bottom of the PX1L carrying case. This is the bottom PCM layer.
- Page 6 PX1L carrying case. When placing PXC coolant packs in the PX1L carrying case, be sure to keep the pull-tab “UP” so that the pack can be removed easily. Place one frozen PXC (-20°C) on the bottom of the PX1L carrying case. This is the bottom PCM layer.
- Page 7 Figure 1 Rev. 6/26/07 Page 7 of 9...
- Page 8 AcuTemp AX27L (formerly VaxiCool®), AcuTemp PX1L (formerly VaxiPac®), and AcuTemp PXC (formerly VaxiSafe™) are products of AcuTemp, 2900 Dryden Road, Dayton, Ohio 45439 USA. For information, contact AcuTemp toll-free at 866- 312-0114 or at 937-312-0114, by fax at 937-312-1277, or email to support@acutemp.com.
-
Page 9: General Specifications
GENERAL SPECIFICATIONS PX1L Carrying Case: Dimensions (maximum): 11.5” (292 mm) H x 7.9” (200 mm) W x 13.7” (348 mm) L 13.4” (341 mm) height with handle Payload Area: 2.0” (51 mm) H x 3.3” (84 mm) W x 9.3” (236 mm) L Weight (empty): 5.5 lbs (2.5 kg)
Need help?
Do you have a question about the PX1L and is the answer not in the manual?
Questions and answers