Advertisement
QUICK START GUIDE
eufy Security Smart Lock E110
Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are
trademarks of Anker Innovations Limited, registered in the United States and other
countries. All other trademarks are the property of their respective owners.
Model: T8502
51005003597 V02
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for eufy Security E110
Summary of Contents for eufy Security E110
- Page 1 QUICK START GUIDE eufy Security Smart Lock E110 Anker Innovations Limited. All rights reserved. eufy Security and eufy Security Logo are trademarks of Anker Innovations Limited, registered in the United States and other countries. All other trademarks are the property of their respective owners.
- Page 2 ① Keypad ① Battery Compartment ② Status Light ② Serial Number: Use to add the lock to the eufy Security app. ③ QR Code: Use to add the lock to the eufy Security app. • Blue: Door unlocked ④ SYNC Button: Use to pair the lock with the doorbell chime.
-
Page 3: What's Included
INSTALLATION WHAT'S INCLUDED Step 1. Prepare the Door For Smart Lock Installation 1. Remove the existing lock and check your door. (Step 2) Deadbolt Installation Set 2. Check if your door has holes like the one below. Standard US doors are already compatible. - Page 4 Step 2. Install Deadbolt 1. Check your door to see if the deadbolt requires adjustment. 2. Insert and screw the deadbolt into the doorframe. 2-3/8 Backset 2⅜" / 60 mm If the backset is 70 mm, turn the faceplate 180° to extend the length.
-
Page 5: Step 4. Install Interior Assembly
Step 3. Install Exterior Assembly Step 4. Install Interior Assembly • Remove the spacer before installation if you have a 38 mm cross bore. 1. Detach the back cover from the interior assembly. Cross Bore Diameter 1 ½" / 38 mm 2. - Page 6 3. Secure the back cover with screws. 4. Wire to the interior assembly. Tightly fasten the screws in place. Set the screws with your hands, then use a screwdriver to secure them. • (Optional) If the back cover is not fastened tightly to the door, use the additional 5.
- Page 7 6. Install the 4 AA batteries provided with the correct polarity. Don't put on the cover until the system setup is done in the app. Make sure the deadbolt is retracted and the thumb turn knob is on the 'unlock' position, check if the deadbolt moves properly by turning the thumbturn.
-
Page 8: Setting Up The System
1. Download and install the eufy Security app, then sign up for an account. the calibration might be failed during the setup. 2. Follow the in-app instructions to add the Smart Lock E110 to your device list. • Please visit https://support.eufylife.com/s/ or scan the QR code for more information. - Page 9 NOTICE FCC Radio Frequency Exposure Statement The device has been evaluated to meet general RF exposure requirements. The device can be used in fixed/mobile exposure condition. The min separation distance is 20cm. Notice: Shielded cables Warning All connections to other computing devices must be made using shielded cables •...
-
Page 10: Customer Service
Customer Service Notice (Canada) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1)this device may not cause interference, and 12-month limited warranty (2)this device must accept any interference, including interference that may cause undesired operation of the device.
Need help?
Do you have a question about the E110 and is the answer not in the manual?
Questions and answers