Autohaus AHWL-10W Directions For Use

10W PORTABLE LED WORK LIGHT

PARTS IDENTIFICATION

A: Padded Carry Handle
B: Portable tube
C: Luminous panel
D: Lamp body fixing frame
E: Screw Knob
F: Stand

ASSEMBLY

1. Slide the stand (F) into the worklight bracket
(D). Align the holes in the bracket and the
stand. Insert and tighten angle adjustment
screw knob (E).
2. To alter the angle of the worklight, simply
loosen the angle adjustment screw knob(E),
pivot the worklight until the desired angle is
DIRECTIONS FOR USE
AHWL-10W
C
3. Ensure the cable does not catch on any sharp
4. Your worklight is now ready for use.
A
E
achieved and re-tighten knob (E). Check the
worklight is secure and that the stand is stable
and has a firm footing.
object and that the mains plug connection is
adequately protected against rain or moisture.
B
D
F