Incyt Lyra LX Quick Start Manual

For help visit incyt by LX
incyt.io/support
Copyright 2020 LX Corporation Pty Ltd.
All rights reserved.
Apple and the Apple Logo are trademarks of Apple
Inc., registered in the U.S. and other countries.
App Store is a service mark of Apple Inc., registered
in the U.S. and other countries.
Google Play and the Google Play logo are
trademarks of Google Inc.
9
Remove the VHB protective film on the
underside of the device, and press firmly
against the mounting surface for 30
seconds to maximise adhesion.
Note: VHB adhesive will reach maximum
bonding strength after 24 hours.
For an alternate secure mounting method,
10
mount the device using a cable tie to the
desired fixture, or connect to keyring as
pictured below:
Mounting
surface
Keyring
Cable tie
Safety and compliance
Ensure installation complies with all
relevant local regulations and requirements.
Troubleshooting
Visit incyt.io/support for further installation,
activation and trouble-shooting information.
Product Overview
1 2
C01E1801A62E98A3
4
1 Environmental Sensing Port
(Lyra Sense model only)
2 LED
3 Device ID
4 VHB Tape
3
Lyra
Quick Start Guide