Mount Timer - Rain Bird PC 506 Series Installation, Programming, And Operation Manual

Mount Timer

Before securing your timer to the wall, make sure
that there is enough room on the left side for the
door to swing open.
Screw two #10 screws into the wall 3
apart, leaving about ¼ inch of each screw head
protruding from the wall. Use plastic anchors to
secure the screws to plaster or masonry walls.
Hang the timer on the screws using the keyhole
slots on its back.
OPTIONAL: To further secure the timer, remove
the lower access cover by gently prying it out of
the slots on the lower left and right corners. Then
drive screws through the lower three mounting
holes.
PC-506 Series Sprinkler Timer
/ inches
15
16
English
Page 5