Setting Cue Points - Numark AXIS 8 Reference Manual

SETTING CUE POINTS

PLAY and CUE
Pressing the "PLAY" button starts the disc. Pressing the "CUE" button will
reset the disc to the last place where the disc was started. This is called the
cue point. By alternately pressing the "PLAY" button and the "CUE" button,
the disc may be returned and played from the cue point any number of times.
This function is called back cue.
PLAY, PAUSE and CUE
When pressing "PLAY" to start then pressing "PAUSE" and then "PLAY"
again, a new cue point will be set. Pressing "CUE" will return to the last pause
position and will be the new cue point.
EDITING CUE POINT
When the jog wheel is turned while paused, a new cue point can be located.
By pressing "PLAY" while paused that point will be set. By pressing "PLAY"
again (STUTTER) the point can be checked as desirable.
-5-