Advertisement
Quick Links
Advertisement
Related Manuals for Vava VA-LT030
Summary of Contents for Vava VA-LT030
- Page 1 120" ALR Projector Screen Max User Manual vava.com VA-LT030...
- Page 2 CONTENTS IMPORTANT SAFETY INSTRUCTIONS KNOWING YOUR SCREEN ASSEMBLING YOUR SCREEN WARRANTY AND SERVICE...
- Page 3 • Children should be supervised to ensure that they do not play with the screen. • Please contact your local dealer for repair or maintenance. For any questions or concerns, please email us at support@vava.com or call us at (877) 969-8282. READ AND SAVE THESE INSTRUCTIONS...
- Page 4 Expanded Overview Package Contents Inner Frames *4 Inner Frames *2 Cross M4*8 Gloves Support Rod *1 Screwdriver Screws *16 (pairs) Fiberglass Draw ALR Screen *1 Hooks *2 Strips Springs 10-A 10-A 10-B 10-C 10-B Exterior Frames *4 Exterior Frames *2 02 // ALR Screen for UST Projector ALR Screen for UST Projector // 03...
- Page 5 Specifications Model VA-LT030 Gain Wall Anchors Viewing Angle 160° Corner Wall Drilling Level with Screws *8 Ruler *1 Templates *1 Protectors (sets) Ambient Light Resistance Projection Size 2676*1514 mm/105.35*59.61 in Projection Ratio 16:9 Screen Size 2656×1494 mm/104.57×58.82 in Screen Weight 12 kg / 26.45 lbs...
- Page 6 Assemble the Inner Frames 1. Connect the horizontal frames and fasten the M5*7 screws. 2. Insert the four corner connectors into the horizontal inner frames, and fix the corners with M5*7 screws as shown below. ASSEMBLING YOUR SCREEN M5*7 Screw Corner Connector Connecting Rod Horizontal Frames...
- Page 7 3. Install the support rod as shown below. Screen side face down Black side face up Support Rod: Vertical to the M4*8 Screw horizontal frames Clean, flat cloth Assemble the Screen 7-A: Long Fiberglass Strip 1. Put on gloves and place a clean cloth (or use the packaging material 7-B: Short Fiberglass Strip for the screen) on a flat, clean and level surface.
- Page 8 Hooks Grooves Fiberglass Strip Corner alignment mark Spring Inner Frame Screen Note: After extended use, the screen may become less taut. Attach the Screen springs to the innermost groove to back side re-flatten it. Cloth Screen Screen lower edge mark (for short-focus anti-light 5.
- Page 9 Assemble the Outer Frames Mount on the Wall 1. Estimate the wall mount area for the screen. The lower edge of 1. Place the outer frames against the inner frames, align the four the screen should be 60-80cm / 23.6-31.5 in above the ground corners and fix with the included M4*8 screws.
- Page 10 4. Drill holes respectively and install the four wall brackets using 3. Make sure the screen is correctly assembled, then wrap the the wall anchors with screws. screen front with the cloth to prevent it from being damaged or Note: Make sure the brackets are level with the level ruler. scratched.
- Page 11 Please contact your local sales representative or after-sales team for more details.For any questions or concerns, please email us at support@vava.com or call us at (877) 969-8282 (Monday - Friday, 9:00 a.m. - 5:00 p.m. PST). 16 // ALR Screen for UST Projector...
- Page 12 Rev_1.0_EN NORTH AMERICA E-mail: support@vava.com MANUFACTURER Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd. Address: Floor 7 , Building E, Galaxy World Phase II, Shenzhen, China Made in China...
- Page 13 尺寸：100*145mm 骑马订 材质：封面157克铜版纸 内页105克铜版纸...
Need help?
Do you have a question about the VA-LT030 and is the answer not in the manual?
Questions and answers