Table of Contents
Advertisement
Chapter 5 - Other Functions: Using the MORE key
Snapshot screen (961/962 only)
To rename a stored snapshot, from the SNAPSHOT screen,
press the CURSOR PAD to highlight the desired slot, and press
RENAME . Use the KEYPAD to enter a new name and press
ACCEPT .
To display a stored snapshot, from the SNAPSHOT screen,
press the CURSOR PAD to highlight the desired slot, and press
DISPLAY . When finished, press RETURN .
To erase a snapshot from a slot, from the SNAPSHOT screen,
press the CURSOR PAD to highlight the desired slot, and press
ERASE . You'll be asked to confirm erasure by pressing YES .
The slot will be erased to make room for a new snapshot.
If your 961/962 has a floppy disk drive installed, you can save
Archiving and
one snapshot on each disk.
restoring a
To save a stored snapshot onto a floppy disk, from the
snapshot with a
SNAPSHOT screen, press the CURSOR PAD to highlight the
floppy disk
desired slot, and press ARCHIVE . Insert a floppy disk and press
OK . Any old data on the disk will be erased!
To restore a snapshot from a floppy disk to any empty slot,
from the SNAPSHOT screen, press the CURSOR PAD to
highlight the desired empty slot, and press RESTORE . Insert
the floppy disk and press OK .
490 Echo Sounder Operations Manual Rev. B2
Page 5-7
Advertisement
Table of Contents
Troubleshooting
