Advertisement
Quick Links
1) Tools Needed for Build:
-
14, 16, 17mm wrenches
2) Unbolt the crate, open and remove all parts. Main edger body can be left on the crate to be strapped and lifted.
Range Road Enterprises Ltd
Box 944
Eckville AB T0M 0X0
www.range-road.ca
RR5510 Wood Edger
Assembly of the RR5510 Wood Edger
Advertisement
Related Manuals for Range Road RR5510
Summary of Contents for Range Road RR5510
- Page 1 RR5510 Wood Edger Assembly of the RR5510 Wood Edger 1) Tools Needed for Build: 14, 16, 17mm wrenches 2) Unbolt the crate, open and remove all parts. Main edger body can be left on the crate to be strapped and lifted.
- Page 2 RR5510 Wood Edger Use equipment to lift edger high enough off ground to install legs Use straps to lift Straps need to be placed on the outside of the engine and hydraulic tank as shown in pictures They will be out of the way for...
- Page 3 RR5510 Wood Edger There are four different leg types 2 x square bottom with bolts 2 x square bottom with no bolts 1 x square bottom with short neck 4 x round bottom with adjustable feet Install two square bottom legs...
- Page 4 RR5510 Wood Edger Attach single leg with square bottom and short neck under engine mount plate Attach the remaining two square bottom legs to entrance side (control side) of machine After these legs are attached the machine can be lowered and...
- Page 5 RR5510 Wood Edger The sawdust shoot on the exit of the machine can now be bolted on Locate the four collared bolts on the bottom of the main body Loosen these four bolts but don’t take them out The sawdust shoot can be put...
- Page 6 RR5510 Wood Edger Table with rollers can now be attached, leaving the three bolts loose for now Use something to support the table to make this easier Use two of the round bottom adjustable legs for each roller table Adjust the legs so the roller...
- Page 7 RR5510 Wood Edger The battery con be connected and the edger is now complete and ready to be filled with fluid *Gasoline *Hydraulic Fluid *Engine oil Range Road Enterprises Ltd Box 944 Eckville AB T0M 0X0 www.range-road.ca...