Related Manuals for Mueller MLR010020N
Summary of Contents for Mueller MLR010020N
- Page 1 ultra glass kettle H I G H Q U A L I T Y B O R O S I L I C A T E G L A S S 1.8 L 1.0 L 0.5 L...
- Page 2 ultra kettle manual...
- Page 3 IMPORTANT SAFETY INSTRUCTIONS Before using the electrical appliance, the basic precautions below should always be followed: – Read all instructions and save them for future reference. – Check that the voltage marked on the appliance rating plate matches your local supply.
- Page 4 – Do not fill the Kettle when positioned on the Power Base. Dry any water on the bottom of the Body before placing the Kettle onto the Power Base. – This Kettle is to be used with the supplied base only. –...
- Page 5 PARTS LIST Lid Release Button On/Off Switch 1.8 L 1.0 L Handle 0.5 L Body Power Base PARTS LIST | 5...
- Page 6 BEFORE FIRST USE IMPORTANT! Check that the product is free of damage. Before making hot water to consume, fill the Kettle with fresh water to the maximum level. Boil the water following the instructions. Pour out the hot water and rinse the Kettle once more.
- Page 7 DESCALING INSTRUCTIONS Descaling the Kettle With the power off, remove the Empty the solution. Kettle from its Power Base. Fill the Kettle with clean water. Open the Lid with the Lid Release Button. Fill the Kettle with a solution Boil, then discard the water. Repeat of 16.9 oz (0.5 L) white vinegar and one more time before consuming 40.6 oz (1.2 L) clean water.
- Page 8 H I G H Q U A L I T Y B O R O S I L I C AT E G L A S S PRINTED IN CHINA SKU: MLR010020N happiness is homemade MUELLERDIRECT.COM 37 E 18TH STREET SUPPORT@MUELLERDIRECT.COM...
Need help?
Do you have a question about the MLR010020N and is the answer not in the manual?
Questions and answers
The handle on my **** has suddenly become too hot to hold. What’s the problem?
The handle on the Mueller MLR010020N could become too hot to hold if the appliance is used improperly. Potential causes include:
1. Contact with Hot Surfaces: If the handle comes into contact with the hot body of the kettle or steam, it may become too hot.
2. Extended Operation: Prolonged heating periods may cause heat to transfer to the handle.
3. Improper Placement: Placing the kettle near a hot gas or electric burner could cause excessive heating.
4. Damaged Insulation: If the handle's insulation is compromised, heat could transfer more easily.
To prevent this, always use the handle properly and avoid exposing it to direct heat sources.
This answer is automatically generated