Table of Contents
Advertisement
Step #4: Initiate Upgrade Process
Software Upgrade via SNMP
Use the following procedure to upgrade a CMTS 1000 using an SNMP
manager.
1. Select CMTS 1000 to be upgraded.
2. Select the DocsDev MIB Object ID.
3. Select the Docs_Software MIB Object ID. The SNMP manager
4. Set the Server IP Address to the IP Address of the TFTP server.
5. Set the Filename to the filename of the upgrade software that you
Caution: All parameters must be set exactly as stated. Verify that all
previous steps are complete and accurate, especially file names and IP
Addresses. Verify that the TFTP server is ON and the loadable files are in
the TFTP server's public directory.
6. Initiate the upgrade process by setting the AdminStatus MIB to
You can monitor the process if your TFTP server has a display window, or
returns status information to you. The process takes about one minute.
305472-B Rev 02
displays the softwareInfo Table.
copied into the TFTP server's default directory. Enter only the
filename. Do not enter the full path to the TFTP server's public
directory.
upgradeFromMgt.
Release Notes
1-5
Advertisement
Table of Contents
