Adding Additional Users; Deleting Users; Arming The System; Disarming The System - CRIMEWATCH SECURITY Paradox Alarm SP5500 User Manual

Paradox Alarm SP5500 & SP6000 - TM50 Keypad User Guide

Adding additional users

• Press the [Menu]
• Press the [System Setup]
• Enter the Master Code.
• Press the [Users]
• Press the [+] button for selected user.
• Enter User Name or press [Skip].
• Enter their new 4 digit PIN Code.
• Press the [Save] button.
• Confirm their new 4 digit PIN Code.
• Press the [Save] button.
• Option to learn a remote keyfob in, press button on
remote or press [Skip].
• Press the [Home]

Deleting Users

• Press the [Menu]
• Press the [System Setup]
• Enter the Master Code.
• Press the [Users]
• Press the [Delete]
• Confirm your request.
• Press the [Home]

Arming the system

• Press the [Arm] button.
• Enter your 4 digit PIN Code.
• Exit delay should start counting down

Disarming the system

• Press the [Off] button.
• Enter your 4 digit PIN Code.

Bypassing Zones

• Press the [Menu]
• Press the [Bypass Zones]
• Select Zone/s to Bypass.
• Press the [Save] button.
• Arm the Alarm System.
*** Once the Alarm System is disarmed, the
Bypass will be cleared and must be entered again
if required. Bypass clears on each disarm.
button.
button.
button.
button.
button.
button.
button.
button for selected user.
button.
button.
button.
> Support IPC UPnP, 4PoE
ports