Page 2
Paradox Alarm SP5500 & SP6000 - TM50 Keypad User Guide > Support IPC UPnP, 4PoE ports Initial Setup Step 1: Initial Setup • Locate the Alarm Panel (this will be located in a Cupboard or WIR). • Open the panel and connect the battery, there will be a black and red lead loose, connect the black cable to black terminal on battery and red cable to red terminal.
Page 3
Paradox Alarm SP5500 & SP6000 - TM50 Keypad User Guide > Support IPC UPnP, 4PoE ports Adding additional users • Press the [Menu] button. • Press the [System Setup] button. • Enter the Master Code. • Press the [Users] button.
Page 4
Paradox Alarm SP5500 & SP6000 - TM50 Keypad User Guide > Support IPC UPnP, 4PoE ports Fault Finding Trouble Display Wireless Zone Low Battery The batteries for one of the system’s wireless devices needs to be replaced. (check to replace the...
Need help?
Do you have a question about the Paradox Alarm SP5500 and is the answer not in the manual?
Questions and answers