Advertisement
Step 5: Assemble the two supporting poles.
Insert one supporting pole into the top and bottom pocket on either side of the entrance
inside the screen house. You can further strap and secure the supporting pole with the hook
and loop strips between the top and bottom pockets. Place the other supporting pole into
the top and bottom pockets on the adjacent side of the entrance and secure accordingly.
Step 6: Secure the screen house to the ground by nailing the pegs into the eyelets located
at the corners of the screen house (labelled A below).
Slip the guy ropes through the tags on each side pulled in step 3 and secure the guy ropes
with the pegs to the ground (labelled B below).
Note:
When securing the screen house body with pegs, insert them in at a 45° angle into the
ground to ensure the screen house will stay grounded.
Advertisement
