Advertisement
Step 3: With one hand holding one side of the screen body up, pull on the tag in the centre
of the pole hub with the other. Once the side has been secured, repeat this process four
more times until the five sides with pole hubs are standing.
The entrance side of the screen house does not have a pole hub.
Note:
Keep your hands and body away from the joint of the pole hub as you may get caught,
which could lead to potential injuries.
Step 4: Untie the side panels that make up the entrance. From the entrance, enter the
screen house. Push the pole hub above up with your palm to create the roof of the screen
house.
Do not grab or pull on the pole hub.
At this point, the side panels can be zipped along the top and middle of the entrance to
close off the entry if you wish.
x5
Advertisement
