GE PXRQ400T Owner's Manual & Installation Instructions page 8

Installation Instructions
THINGS TO CHANGE BEFORE BEGINNING INSTALLATION
FEED WATER
The water supply to the Reverse Osmosis system must
Well water may need conditioning; have the water
tested by a water analysis laboratory and get their
recommendations for treatment.
IMPORTANT: For water with a hardness greater
recommended. Failure to install a softener will reduce
the life of the Reverse Osmosis cartridge.
PLAN THE INSTALLATION
The Reverse Osmosis System should be installed under a sink.
PREPARE FOR INSTALLATION
installation. Ensure tubes may be routed without kinking.
3. Remove the filter from planned location and set aside.
8
RO DRAIN CONNECTION
the Reverse Osmosis membrane cartridge.
REVERSE OSMOSIS (RO) FAUCET
The RO product water faucet installs on the sink or on
the countertop next to the sink. It may be installed in an
existing sink spray attachment hole, or a hole may be
from the faucet, and for securing the faucet in place. All
three faucet tubes are supplied already connected at
one end to the faucet.
49-6000289 Rev. 1