Citizen CT-S601 II User Manual page 19

2.2 Inside the paper cover
Auto cutter
Manual cutter
Platen
Feeds the paper.
Do not remove the platen except to do maintenance.
Paper near-end sensor (PNE sensor) (Except for liner-free model)
Detects when the paper is near the end of the roll. Adjust the position of the
sensor to determine when it detects the end of the paper is near.
Button to change paper near-end sensor (Except for liner-free model)
Change the position of the paper near-end sensor to match the paper being
used.
Manual cutter
For cutting the paper manually when printing is finished.
Auto cutter
Automatically cuts the paper when printing is finished.
Print head (thermal)
Prints characters and graphic data on paper (paper rolls).
Paper end sensor (PE sensor)
Detects when there is no paper. Printing stops when this sensor detects there
is no paper.
Print head (thermal)
Refer to 3.12 Adjusting the Paper Near-end Sensor
Refer to 5.3 Manual Setting of Memory Switches
Paper-end sensor
(PE sensor)
Button to change paper
near-end sensor
— 16 —
Platen
Paper near-end sensor
(PNE sensor)