Product Introduction - Whirlpool WF2T170 Installation Manual

Product Introduction

Moving and Placement
• Do not move the refrigerator with its doors or handles, please move by lifting up the bottom of it.
• Do not invert, horizontally lay, squeeze or vibrate the refrigerator. When move the refrigerator, do not decline
more than 45°.
• In order to avoid appliances' damage or body injury, please remove all the parts and shelves, and seal the draw-
ers, vegetable compartments, door shelves and doors with stickers, to ensure doors will not open and no parts
collision, friction, falling during transportation.
• Do not grasp the doors or top cover when moving the refrigerator, but can tilt it back (no more than 20°), use
trundles to move for a short distance.
• The refrigerator should be put on a flat and solid floor. The mat must be flat, solid, hard and fire-proof if the re-
frigerator needs to be put at a higher place. Please note that the bottom foam cannot be used as a mat.
• Keep away from heat and avoid direct sunlight. Do not place the freezer in humid or watery places to prevent
rust or reduction of insulating effect.
• Refrigerator will be heated during operation. Please keep at least 5cm of space from the side to the wall, at least
5cm from the back to the wall, and at least 10cm from its top.
• Please leave enough space to ensure feasible opening and drawer removal. Dimensions shown are for reference
only.
• If the refrigerator is not stable, adjusting the adjustable feet can fix the problem. The clockwise direction will
increase the height and the counter clockwise direction will decrease the height.
Flat & solid floor Unstable floor
Decline no more
Beware of falling
than 45°
Please reserve
at least 5cm
at back.
5CM
5CM 5CM
Keep sufficient spacing Adjustable feet
22