Advertisement
Instructions for Operation of cleatPRO Steamer
SETTING UP and using your unit (continued)
4
Close lid. Switch unit on 30 minutes prior to first
use. Once interior tank is steaming, open lid and
insert shoes/gloves carefully into unit. Close lid and
allow steaming process for 5-30 minutes.
CAUTION: STEAM FROM UNIT IS HOT. TAKE
CARE WHEN OPENING AND CLOSING LID.
5
After desired steaming time, open lid and
remove shoes/gloves from unit.
CAUTION: SHOE/GLOVES MAY BE HOT.
6
To drain water, unplug unit from
outlet and allow time for water to
cool. Once water has cooled, for
the T-12-M-CC and T-12-M-GP:
locate the drain valve in the back of
the unit and turn counterclockwise.
To drain water from the T-8-S-CC,
remove interior rack, then tilt unit
on its side and allow water to drain.
Rinse excess debris as needed.
The water temperature for normal operating conditions is about 165°F (74°C). The thermostat is very sensitive; even a small
adjustment can raise or lower the temperature several degrees. The thermostat has an adjustable temperature range of 65°F (18°C) to
175°F (79°C) ±5°F (-15°C). To adjust the temperature, you need a Thermometer capable of 180° F (83° C).
FOR TECHNICAL ASSISTANCE CONTACT WHITEHALL REHAB AND SPORTS MEDICINE
WHITEHALL MANUFACTURING • P.O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 591-9280 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallrehabilitation.com
®
T-8-S-CC
T-12-M-CC
7
To adjust steaming temperature, locate temperature stem at
the back of the unit, above the power socket, and attach
temperature knob (comes in separate bag with manual).
Using the knob, turn clockwise to increase the temperature.
Allow the temperature to stabilize, and measure the water
temperature with the thermometer.
CAUTION: Sensitive thermostat - a small adjustment
changes several degrees. Temperature range of 65°F
(18°C) to 175°F (79°C) ±5°F (-15°C).
T-12-M-GP
TEMPERATURE
4
Advertisement
