Advertisement
Instructions for Operation of cleatPRO Steamer
Congratulations on receiving your cleatPRO® Steamer .
Your Steamer is a simple and trouble-free unit to operate. The tank body, lid, bottom and tank housing are all made from type
304 stainless steel. The controls are an ON/OFF switch on the front of the unit and a thermostat on the rear to control the water
temperature. Unit is preset to a normal operating temperature.
Side handles and a handle on the lid minimize contact with the hot surface. Inside the unit is a heating element and a
temperature sensor. Side handles and locking casters below allow easy movement of the unit. A drain valve is located on the
back of the unit.
CleatPRO
Rack
With Model T-12-M-CC-EG22
and Model ET-12-M-CC-EG22
CleatPRO
Glove Rack
With Model T-12-M--EG22
and Model ET-12-M-CC-EG22
1
WHITEHALL MANUFACTURING • P.O. BOX 3527 • City of Industry, CA 91744-0527 U.S.A
Phone (800) 591-9280 • (626) 968-6681 • Fax (626) 855-4862 • Web: www.whitehallrehabilitation.com
®
ON/OFF
Switch
Model T-12-M-CC-EG22 and
Model T-12-M-GP-EG22
100-120 Volts, 50/60 Hz,
15 Amps
Model ET-12-M-CC-EG22 and
Model ET-12-M-GP-EG22
200-240 Volts, 50/60 Hz,
6 Amps
Lid
Handle
Hospital Grade
Power Cord
Advertisement
