Advertisement
4. CONTENTS
CARTON CO
4.1.
Contents (fig.2 ) are inside cleaner body (except item10).
4.2.
Locate the two side locking hooks (Fig.2.6) which hold the top section in place.
4.3.
Undo the locking hooks, remove the top section and take out the items in the container (fig.1).
4.4.
Check and identify each component as shown. If anything is missing or damaged please contact your supplier immediately.
Item no
1
2
3
4
5
Safety float valve (Fig7.5)
6
7
8
9
Blow connector (Fig.7.9)
10
11
4.5.
ASSEMBLY (fig.2).
WARNING: Remove Battery
‰
4.5.1.
Undo head locking hooks and lift off head assembly (fig.2).
4.5.2.
Fitting the appliance head (Fig.2.3).
4.5.3.
The appliance head (Fig.2.3) is fastened to the tank (7) by the locking hook (6). To remove the appliance head (Fig.2.3), open the locking
hook (6) and remove the appliance head (3). When fitting the appliance head (3), make sure that the locking hook (6) locks into place
correctly.
4.6.
FITTING THE FILTER
NOTE: Never use the wet and dry vacuum cleaner without a filter! Always ensure that the filters are perfectly secure!
4.7.
FITTING THE FOAM FILTER (fig.3) for wet vaccuuming.
4.7.1.
For wet-vacuuming, slip the supplied foam filter (Fig.3.15) over the filter basket.
© Jack Sealey Limited
fig.1
Description
Handle
On/Off switch
Alliance head
Filter basket (Fig.7.4)
Locking hook
Tank
Suction hose connector
Flexible hose
Universal brush
fig.3
Original Language Version
Item no
12
2-in-1 crevice/brush nozzle
13
14
15
16
17
Battery charger (not shown or supplied).
18
Battery (shown in fig.9 but not supplied).
19
Push Button lock (shown in fig.9)
20
Suction hose holder
21
Slots for nozzle storage
Description
Cartridge filter
Cloth filter
Foam filter
Battery cover
CP20VWDV
Issue 2 15/11/22
fig.2
Advertisement
