Advertisement
WAN Configura�on
Interface Type: GajShield firewall supports 3 types of network modes standard, PPPoE Connec�on & DHCP.
i. Standard Mode
IP Address & Netmask enter IP details provided by your ISP.
Next Hop IP is ISP Gateway or router IP.
MTU (Maximum Transmission Unit) Insert maximum packet size, in bytes, that can be sent through the interface.
NOTE: We recommend that you use the default, 1500 bytes, unless your network equipment requires a different packet size.
ii. PPPoE Connec�on
IP Address & Netmask select (Sta�c / Dynamic) depending on your ISP se�ngs.
Next Hop IP select (Sta�c / Assigned by Remote) depending upon your ISP se�ngs.
Access Concentrator the PPPoE server name provided by the ISP
NOTE: Leave it empty if ISP does not provide a server name.
Service Name enter ISP name or details provided by service provider.
Username / Password Insert username & password provided by ISP for PPPoE authen�ca�on.
5. Enter ISP IP details under WAN Configura�on.
Advertisement
