Advertisement
4.6.
LOCKER FITTINGS
4.6.1.
Install the storage hooks on the back of the locker with 4 pcs hexagon socket button cap screws.
4.6.2.
Determine the desired height of your shelves and secure by inserting shelf edges into the tabs flanges on the side panels (fig.6).
4.6.3.
The locker has pre-installed closet rail inserts on side panels which are suitable for rails up to Ø31mm (1.25") (fig.7) (not included).
5. MAINTENANCE
5.1.
Periodically lubricate castors and tighten all hardware.
5.2.
Lightly oil all runners / moving parts using a soft cloth.
5.3.
Clean the surfaces with a soft cloth and a mild water/detergent solution.
ENVIRONMENT PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted,
taken to a recycling centre and disposed of in a manner which is compatible with the environment. When the product
becomes completely unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and
dispose of the product and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
fig.7
fig.6
01284 703534
sales@sealey.co.uk
Original Language Version
www.sealey.co.uk
AP6115BE, AP6104BE, AP6103BE
REGISTER YOUR
PURCHASE HERE
Issue 3 (2)
07/11/22
Advertisement
