Step Three: Add Endpoints (Optional) - Cisco TelePresence VCR MSE 8220 Getting Started

Step three: Add endpoints (optional)

You can define pre-configured endpoints. This means that when an end-user calls in
to the VCR MSE 8220 from an endpoint to watch a recording, the blade will use the
correct settings for that endpoint. It also means that when calling out to endpoints
from the blade, you choose the pre-configured endpoints from a list, rather than
entering endpoint details every time.
To define pre-configured endpoints:
1 In the web interface of the VCR MSE 8220, go to
To add a H.323 endpoint, click

To add a SIP endpoint, click

2 Configure the endpoint settings you require, using the online help for further
assistance.
3 Click
Add endpoint
Add H.323
Add SIP
.
Configuring the VCR MSE 8220
:
Endpoints
11