Table of Contents
Advertisement
Basic Alpha SRM Console Command Descriptions
deposit
Syntax
Arguments
Symbolic
Address
gpr-name
ipr-name
PC
+
Alpha SRM Console Firmware
7–8
Writes data to the specified address.
deposit [-{b,w,l,q,o,h}] [{physical, virtual, gpr,
fpr, ipr}] [-n <count>] [-s <step>]
[<device>:]<address> <data>
<device>:
The optional device name (or address space) selects the device to
access. The following platform-independent devices are supported:
•
pmem
Physical memory.
•
vmem
Virtual memory. All access and protection checking occur.
If the access is not allowed to a program running with the
current processor status (PS), the console issues an error
message. If memory mapping is not enabled, virtual
addresses are equal to physical addresses.
<address>
An address that specifies the offset within a device into which data is
deposited. The address may be any legal symbolic address.
Valid symbolic addresses are shown in the following table.
Description
Represents general-purpose register.
Represents internal processor register.
Program counter.
The location immediately following the last location referenced by
examine or deposit.
Advertisement
Table of Contents
