Table of Contents
Advertisement
Quick Links
ITEM NUMBER: BMCCPD7204/BMCCPD7206/BMCCPD8004/BMCCPD8006
PARTS
DD
BB
*Quantity of shelf (F) and support tube (L) will
vary by model.
TOOLS NEEDED
© 2018 Suncast Corporation, Batavia, IL
CC
AA
N
P
F
L
To learn about other Suncast products, please call
1-855-477-1260 or 1-630-879-2050.
Product Feedback? Go To: Suncastcommercial.com/feedback
OR email us at: feedback@suncastcommercial.com
C
H
G
E
D
A
K
J
1/2"
B
0361365C
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Suncast BMCCPD7204
Summary of Contents for Suncast BMCCPD7204
- Page 1 To learn about other Suncast products, please call 1-855-477-1260 or 1-630-879-2050. Product Feedback? Go To: Suncastcommercial.com/feedback OR email us at: feedback@suncastcommercial.com ITEM NUMBER: BMCCPD7204/BMCCPD7206/BMCCPD8004/BMCCPD8006 PARTS *Quantity of shelf (F) and support tube (L) will vary by model. TOOLS NEEDED 1/2”...
- Page 2 This kit contains parts that can be damaged if assembled incorrectly or in the wrong sequence. • Please follow instructions. Suncast is not responsible for replacing parts lost or damaged due to incorrect assembly. • Check for all parts before you begin assembly.
- Page 3 ASSEMBLY All tabs should be engaged before locking panels together in steps 1-3 . Smooth Side Up Align tabs on left side panel (C) with slots on bottom panel Align and engage tabs on back panel (D) with slots on side (A).
- Page 4 SHELF INSTALLATION Attach support tube (L) to shelf (F) using four screws (AA). Insert shelf (F) on angle. Move to a level position while holding Large hole of support tube must face out. Repeat for in hands. remaining shelves. Tab on shelf must engage with slot on inside panel for each shelf.
- Page 5 DOOR ASSEMBLY Insert door latch housing (K) into top right door (G) and snap Before proceeding, please take notice of into place. Insert door latch (J) into door latch housing. Push teeth on housing that will face upward latch pin down so it is fully seated in latch housing. Push when installed on top of right door.
- Page 6 ASSEMBLY - DOORS CONTINUED Insert door latch housing (K) into bottom right door (G) and Before proceeding, please take notice of teeth on snap into place. Insert door latch (J) into door latch housing. housing that will face downward when installed on Push latch pin down so it is fully seated in latch housing.
- Page 7 ASSEMBLY - DOORS CONTINUED With left door (H) in the open position, place door into hinge Snap hinge part (P) onto hinge part (N) as shown. Attach hinge side receptacle on bottom left of cabinet. Insert hinge pin under top (N) to left side panel (C) using three screws (AA).
- Page 8 Suncast assumes no liability for any modified product or consequences resulting from failure of a modified product. Suncast is not responsible for: loss of use of the unit; labor for repair, inspection fees or disposal costs. THIS WARRANTY IS NONTRANSFERABLE. IT EXCLUDES FLOOR MODELS, CLEARANCE AND OPEN BOX UNITS.
Need help?
Do you have a question about the BMCCPD7204 and is the answer not in the manual?
Questions and answers