Do you have a question about the HoseMobile HRC200 and is the answer not in the manual?
Questions and answers
Gilles Bernard
May 26, 2025
how to replace part 0461261A hose connector that leaks
1 comments:
Mr. Anderson
May 27, 2025
To replace the hose connector part 0461261A on a Suncast HRC200:
1. Use a screwdriver to separate the reel crossbrace at the slot and lift it firmly to disengage the snap. 2. Grasp the white release tabs on the out-tube and pull to remove the in-tube. 3. Replace the O-rings on the in-tube if needed and coat new O-rings with silicone-based lubricant. 4. To reconnect, slip the out-tube over the in-tube until it clicks into place. 5. Reattach the reel crossbrace.
Ensure not to overtighten or cross-thread the connector to avoid damage.
Need help?
Do you have a question about the HoseMobile HRC200 and is the answer not in the manual?
Questions and answers
how to replace part 0461261A hose connector that leaks
To replace the hose connector part 0461261A on a Suncast HRC200:
1. Use a screwdriver to separate the reel crossbrace at the slot and lift it firmly to disengage the snap.
2. Grasp the white release tabs on the out-tube and pull to remove the in-tube.
3. Replace the O-rings on the in-tube if needed and coat new O-rings with silicone-based lubricant.
4. To reconnect, slip the out-tube over the in-tube until it clicks into place.
5. Reattach the reel crossbrace.
Ensure not to overtighten or cross-thread the connector to avoid damage.
This answer is automatically generated