Table of Contents
Advertisement
6
Description
Physical description
NT5K02 and NT8D03 Analog Line Cards 553-3001-161
•
NT5K02FA — Ground button low voltage message waiting analog line
card with 600
•
NT5K02GA — Same as NT5K02FA with different loss plan (A/D
-4dB, D/A -3dB)
•
NT5K02HA — Ground button low voltage message waiting analog
line card typically used in Belgium.
•
NT5K02JA — Low voltage message waiting analog line card typically
used in Denmark.
•
NT5K02KA — Ground button low voltage message waiting analog
line card typically used in Netherlands.
•
NT5K02LA — Analog line card typically used in New Zealand.
•
NT5K02MA — Ground button low voltage message waiting analog
line card typically used in Norway.
•
NT5K02NA — Ground button low voltage message waiting analog
line card typically used in Sweden.
•
NT5K02PA — Ground button low voltage message waiting analog line
card typically used in Switzerland.
•
NT5K02QA — Ground button low voltage analog line card typically
used in United Kingdom.
Analog line cards are housed in:
— NT8D37 Intelligent Peripheral Equipment (IPE) Modules:
up to 16 cards
— NT8D11 Common/Peripheral Equipment (CE/PE) Modules:
up to 10 cards
The analog line card circuitry is mounted on a 31.75 by 25.40 cm (12.5 by
10 in.) printed circuit board.
The analog line card connects to the backplane through a 160-pin edge
connector. The backplane is cabled to the input/output (I/O) panel, which
connects to the main distribution frame (MDF), also called a cross-connect
terminal, through 25-pair cables. Telephones then connect to the card at the
MDF.
termination (A/D -4dB, D/A -1dB).
Advertisement
Table of Contents
