Introduction; Activity; Aggression - WowWee ROBOQUAD User Manual

Personality settings - Activity, Aggression, Awareness
State buttons
Activity button
Unshifted
Activity toggle

Introduction

Roboquad's autonomous behavior is determined by his personality setting. His
reactions will vary depending on the three settings (Activity, Aggression and
Awareness) which you can change using the remote controller.
LEDs
Each personality setting has its own tricolor LED. You can press any State
button to enable the state lights, but this will only toggle through the
personality button states. The tricolor LEDs show the current state of the
personality settings. The setting colors are:
• Green
= Low
• Orange
= Medium
• Red
= High
The personality settings will reset to their default settings when the remote
controller powers down or the batteries are replaced. The default setting for all
personalities is Low.
Roboquad changes his personality when the personality buttons are pressed on
the remote controller. If Roboquad does not receive the signal, his personality
will not be altered but the controller will think it has. If this occurs, Roboquad
will update his on-board personality with the controller the next time a
personality button is pressed and he receives the signal.
Aggression button Awareness button
Aggression toggle Awareness toggle

Activity

This button will toggle through Roboquad's activity personality settings.
This mainly affects his autonomous mode.
With a high Activity level Roboquad will spend more time exploring in
autonomous mode.
Lower levels will make him more docile in autonomous mode.

Aggression

This button will toggle through Roboquad's aggression personality settings.
This affects how he reacts to sensor inputs.
With a high Aggression level Roboquad has more aggressive responses.
At lower levels he is more nervous.
Awareness
This button will toggle through Roboquad's awareness personality settings.
This affects the range of his scanner and how much he uses it in autonomous
mode.
With a high Awareness level Roboquad will use longer scanning distances for his
obstacle avoidance, guard mode and smart-scan. He will also spend more time
scanning in autonomous mode.
At lower levels his scanning range is reduced.